Nailer Pro

	Stanley Bostitch C7R90BDSS Coil Stainless Steel Siding Nail
	Simpson Swan Secure S13A125SNBP 1-1/4-Inch by 0.090 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Siding Nails, 1500 per pack
	Simpson Swan Secure S13A175SNBP 1-3/4-Inch by 0.090 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Siding Nails, 1200 per pack
	Simpson Swan Secure S11A175RNBP 1-3/4-Inch by 0.120 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Roofing Nails, 480 per pack
	Simpson Swan Secure S13A150SNBP 1-1/2-Inch by 0.090 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Siding Nails, 1500 per pack
	Anchor 214x092WCSSR 2-1/4-Inch by 0.092 15 Degree Wire Coil Stainless Steel Ring Shank Siding Nails 3,600/CTN
	Simpson Swan Secure S13A250SNBP 2-1/2-Inch by 0.090 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Siding Nails, 900 per pack
	Simpson Swan Secure S13A200WWCBP 2-Inch by 0.090 Ring Shank Wire Weld 15-Degree White Head for PVC Trim T-304 Stainless Steel Coil Siding, 1200 Nails
	Simpson Swan Secure S13A219SNBP 2-3/16-Inch by 0.090 Ring Shank Wire Weld 15-Degree T-304 Stainless Steel Coil Siding Nails, 900 per pack
	Simpson Swan Secure S13A250WWCBP 2-1/2-Inch by 0.090 Ring Shank Wire Weld 15-Degree White Head Stainless Steel Coil Siding, 900 Nails

Stainless Coil Nails

The first thing we need is a network. The network can either buy, make ourselves macramé using 180 meters of 5 mm. in diameter. For the mesh knot will resort to the traditional, strong and adjustable. We will take two pieces of wood, preferably cylindrical, a meter long each, and the varnished. A 3 cm. end is make two holes about 4 mm stainless coil nails. Divide the distance between each pair of holes 11 and will mark the position. For these holes will halyard mesh support of our hammocks. Cut into 13 meters of coils to get 12 cords of that length. We bend them in half and tied by its members to a timber, placing them in the marks and one next to each hole. Halyard will double in half and make an overhand knot about 75 cm. formed on each side, from below each of the whips its corresponding hole. Return to make a simple knot just outside the hole, and in each suit stainless coil nails. Without doubt the most tedious job is to make the knots, can add up to 750 to 800 knots. A good way to get a composition of the network is to use a board, for on it, start to boot. The meshes shall have three inches on one side so that we draw on the board signals as necessary. To guide us better, we make a small hole with a drill at each node, and nailed a nail without a head, leaving the 'skeleton' of the mesh. At the top of a door hung the suit of the hammock and the board of stainless coil nails cord suspended. With high as necessary we can begin to make the knots. There is only starting the first horizontal row of knots and so forth with each row followed to complete the desired length stainless coil nails. At the end of the ends knotted net surplus to the lower pole we marked the same way as the other stick. Draw in pencil drawing of three-inch mesh sides. At each intersection, using a fine drill and drill bit, drill a pilot hole, then snapped finishing stainless coil nails about 5 cm. long, which was a mesh structure exactly as intended. To hang the hammock can use either a wide band fiber, similar to the strap of a blind or a piece of halyard as one used for straps of the hammock. We turn each piece in several turns over thimbles and tied directly to the tree or adequate support. We must take into account the difference in elasticity between the strap (rope climbing) and cotton lace mesh stainless coil nails. Cotton stretches more weight, causing a drop in the mesh quite pronounced, that is resolved, leaving among the internal nodes of the strap enough space to compensate for the difference in elasticity.
. Founded in 1955 under the name "Company of the wire, stainless coil nails and chains of Galatians," the Tref SA, in 1957, has started production of stainless coil nails and, in the 'following year, the first of the chains for industrial use. Since 1963 began production of the first chains of naval and galvanized wire. During the following years has expanded its production capacity and have been acquired new production equipment that enabled the creation of new products derived from the wire: drawn wire in coils and bars, wire coils for agriculture, galvanized wire, hot-wire electro- , nails and nails for building electro. The result of this change were to take up and development of a 'broad phase of restructuring and repositioning the company to better meet the demand of the European market, all based on the significant investments on both lines of production resources human. Tref SA one of the biggest steel processing industriedi Romania and Eastern Europe, and is distinguished among the largest producers in Europe in the field of derivatives of the rod stainless coil nails. The Tref was included in the category of the most reliable companies in Romania, according to the ranking Best Rating 2007, drawn up by Coface Romania. The companies included in this category are evaluated based on performance, financial results and annual guarantee payments to its suppliers, companies that are best characterized in terms of reliability and low risk. Tref SA has a current capacity of 40,000 tons / year, achieved thanks to the high level of experience of good engineers in Western Europe. Today Tref SA produces and puts on the market a wide range of products: Raw drawn wire, black annealed drawn wire, galvanized wire mesh, hot dip galvanized grid network, stainless coil nails and special stainless coil nails for construction. From the reinvestment of profits, Tref has drawn energy to invest in new equipment and to provide its customers with new products, because so far the only manufacturer of galvanized mesh fencing in rolls existing in Romania. With appropriate trade policies aimed at the continuous research of customer satisfaction, the Tref SA has developed a significant activity for the import of steel products, in collaboration with foreign suppliers and consolidated through a more substantial collaboration with one of the most important trade house in Europe: Coutinho & Ferrostaal. Tradition, quality service, attention to the relationship with trading partners, have made possible the export of Tref in over 40 countries worldwide stainless coil nails.
. .